REMOVE POOL STAINS

REMOVE POOL STAINS

For spot or small stains, try Spot Stain Chalk. Easy-to-use chalk tablets are formulated with 4 stain fighters to remove baked on stains. The gently abrasive chalk tablet can also be placed on tough stains for cleaning power while you wait. 

SEE COMPLETE INSTRUCTIONS HERE    

 

For large or complete pool surface stains:

Once you've diagnosed the stain removal product(s) for your stain, its time to remove your pool stains.

Make sure pool water is above 60 F before you begin.

Adjust your pool's water balance to these specific ranges:


  • Free and Total Chlorine (FAC and TAC)        1 - 3 ppm
  • Bromine (Bromine Pools Only)                      2 - 6 ppm
  • Biguanide (For Biguanide Pools Only)          30 - 50 ppm
  • pH                                                                  7.0 - 7.4
  • Total Alkalinity (TA)                                        Below 80 ppm
  • Calcium Hardness (CH)                                 Below 400 ppm
  • Cyanuric Acid (CYA/Stabilizer/Conditioner)   Below 70 ppm
  • Total Dissolved Solids (TDS)                         Below 1,200 ppm*
    • *Salt pools: Less than 4,000 ppm TDS

Calculate the amount of stain removal products you'll need:

STAIN DROP No. 1 removes iron stains and organic debris stains.
DOSAGE: 2 lbs (One Container) per 12,000 gallons pool water.
TYPICAL TREATMENT: 2 - 7 days

SEE COMPLETE INSTRUCTIONS HERE 


STAIN DROP No. 2 removes copper stains and scale.
DOSAGE: 1 lbs per 1,000 gallons pool water.
TYPICAL TREATMENT: 2 - 14 days

STAIN DROP No. 3 oxidizes metal stains for easier metal stain removal.
DOSAGE: 5 lbs (One Container) per 10,000 gallons pool water.
TYPICAL TREATMENT: 2 - 14 days

SEE COMPLETE INSTRUCTIONS HERE